Factory Set Parameters; Controller Version Number - Miller Electric IH Owner's Manual

8-5. Factory Set Parameters

If it becomes necessary to return to factory settings, the following sections list factory settings for the 2408 controller.
All settings can be accessed through the Goto screen. To access the Goto screen, proceed as follows:
AccS
Press Page to
LiSt
Press Scroll
codE
codE
After selecting the desired Goto screen, press the scroll button to display the menu.
Press the page button to move from left to right through the columns; press the scroll button to move down the column;
press the up or down arrow to change parameter settings, if necessary.
8-5-1.

Controller Version Number

2400
V4.09
0
Y
codE
Wait
1 PASS
2 sec.
Goto
B
OPEr
Goto
to B to
ConF
Version Number
(V4.09 Effective w/Serial No. LC089021)
Goto Goto
B to
Edit Ful
When the controller is first turned
on, the version number will display
breifly, and appear as shown.
Controller configuration
parameters vary
version number. See appropriate
Section for the corresponding
version number.
OM-203 185 Page 59
based upon