Changing 5100V Recorder From Degrees F To Degrees C And Change Tc Descriptor - Miller Electric IH Owner's Manual

7-2. Changing 5100V Recorder From Degrees F to Degrees C And Change TC Descriptor

Log in as "Engineer" (see Section
6-2-2-2).
Press "Menu" (bottom right of
display).
Select "Config".
Select "Channels" from pull down
menu.
scrn32
For each Channel Number (1-6):
1. Select "Channel Number".
2. Maximum expected
temperature range reading:
1500 for F typ.
(1472 F) = 800 for C typ.
3. Range units can be changed
between 5F and 5C.
4. Descriptor can be changed in
"Descriptor" field, if desired.
Press "Apply".
Log out.
scrn33
OM-203 185 Page 49