Running Review Software - Miller Electric IH Owner's Manual

There are three files used to produce a chart in Review software as follows:
1. The .uhh file contains the actual temperature data downloaded from the recorder.
2. The c:\Program Files\Eurotherm\Review\Review.erv file contains a copy of the original data and any
annotations added in the Review software.
3. The .cgp file contains the chart graphical properties (setup).
To prevent loss of data due to software or hardware failure, all three file types should be backed up on a regular
basis.
6-3-7.

Running Review Software

Start "Review" software.
scrn1
Insert floppy disk with desired file
into floppy drive on pc.
Select "File".
Select "Transfer Files".
scrn2
OM-203 185 Page 33