Cadence.zone; Power.zone; Sensors; Configure.sensor.settings - Timex Global trainer User Manual

LOW
HIGH
NOTE: If the Low value is set above the High value, the High value is automatically set to 5 beats higher than
the Low value. If the High value is set below the Low value, the Low value is automatically set to 5 beats lower
than the High value. If either value is set outside the acceptable range, the previous settings are retained.
Cadence Zone
Setting Group
CADENCE ZONE
BELOW
ABOVE
Power Zone
Setting Group
POWER ZONE
BELOW
ABOVE

Sensors

Use the Sensors menu to search for, pair, and manage ANT+
cadence and speed sensors, and power meters.
Configure Sensor Settings
1. Press MODE until CONFIGURE displays.
2. Press q to highlight SENSORS, then press 8 .
3. P ress  or q to highlight the setting to change, then press 8 to open the setting change window.
4. P ress  or q to highlight a selection in the setting change window, then press 8 to confirm your
Enter the minimum heart rate threshold. If your heart rate goes below this
threshold, the alert sounds. Press
8
is 30 to 240.
Enter the maximum heart rate threshold. If your heart rate goes above this
threshold, the alert sounds. Press
8
is 30 to 240.
Adjustment
Select ON to alert you when your bike crank rpm is outside the Below or Above
settings, or OFF to disable the cadence zone alert.
Enter the minimum rpm threshold. If you go below this cadence, the alert sounds.
Press to close the setting change window. The range is 0 to 200.
8
Enter the maximum rpm threshold. If you go above this cadence, the alert
sounds. Press to close the setting change window. The range is 0 to 200.
8
Adjustment
Select ON to alert you when generating fewer or more watts than the Below or
Above settings, or OFF to disable the power zone alert.
Enter the minimum power threshold. If you generate less power than this, the
alert sounds. Press to close the setting change window. The range is 0 to 999.
8
Enter the maximum power threshold. If you generate more power than this, the
alert sounds. Press to close the setting change window. The range is 0 to 999.
8
™
.
25
to close the setting change window. The range
to close the setting change window. The range
sensor devices such as heart rate monitors,