Device Reboot - HP 1920 Series User Manual

Device reboot

CAUTION:
•
•
1.
2.
3.
4.
5.
Downloaded from www.Manualslib.com
Item Description
Specify whether to overwrite the file with the same name.
If a file with the same
name already exists,
If you do not select the option, when a file with the same name exists, a dialog box
overwrite it without any
appears, telling you that the file already exists and you cannot continue the
prompt
upgrade.
Reboot after the upgrade Specify whether to reboot the device to make the upgraded software take effect
finished after the application file is uploaded.
Before rebooting the device, save the configuration. Otherwise, all unsaved configuration will be lost
after device reboot.
When the device reboots, re-log in to the device.
Select Device > Device Maintenance from the navigation tree.
Click the Reboot tab.
Figure 41 Device reboot page
Enable or disable the "Check whether the current configuration is saved in the next startup
configuration file" option.
Click Reboot. A confirmation dialog box appears.
Click OK.
If you select Check whether the current configuration is saved in the next startup configuration
file, the system will check the configuration before rebooting the device. If the check succeeds,
the system reboots the device. If the check fails, a dialog box appears, telling you that the
current configuration and the saved configuration are inconsistent, and the device is not
rebooted. In this case, save the current configuration manually before you can reboot the
device.
If you do not select the box, the system reboots the device directly.
manuals search engine
53