Configuring Poe; Configuring Poe Ports - HP 1920 Series User Manual

Configuring PoE

Before configuring PoE, make sure the PoE power supply and PSE are operating correctly. Otherwise,
either you cannot configure PoE or the PoE configuration does not take effect.

Configuring PoE ports

1.
2.
3.
4.
Downloaded from www.Manualslib.com
Select PoE > PoE from the navigation tree.
Click the Port Setup tab.
Figure 489 Port Setup tab
Configure the PoE ports as described in
Click Apply.
Table 163 Configuration items
Item Description
Select Port Select ports to be configured and they are displayed in the Selected Ports area.
Enable or disable PoE on the selected ports.
•
The system does not supply power to or reserve power for the PD connected to
a PoE port if the PoE port is not enabled with the PoE function.
•
You can enable PoE for a PoE port if the PoE port does not result in PoE power
overload. Otherwise, you cannot enable PoE for the PoE port.
Power State
By default, PoE is enabled on a PoE port.
IMPORTANT:
When the sum of the power consumption of all ports exceeds the maximum power of
PSE, the system considers the PSE as overloaded.
manuals search engine
Table 163.
498