Configuring Rate Limit On A Port - HP 1920 Series User Manual

Table 159 Configuration items

Configuring rate limit on a port

1.
2.
3.
4.
Table 160 Configuration items
Downloaded from www.Manualslib.com
Item Description
Enable or disable the WRR queue scheduling mechanism on selected ports. The
following options are available:
WRR
•
•
Select the queue to be configured.
Queue
The value range for a queue ID is 0 to 7.
WRR
Specify the group the current queue is to be assigned to.
Setup
This list is available after you select a queue ID. The following groups are available
for selection:
Group
•
•
Set a weight for the current queue.
Weight
This list is available when group 1 is selected.
Please select port(s) Click to select ports to be configured with queuing on the chassis front panel.
Select QoS > Line rate from the navigation tree.
Click the Setup tab to enter the rate limit configuration page.
Figure 472 Configuring rate limit on a port
Configure rate limit on a port as described in
Click Apply.
Item
Please select an interface type
manuals search engine
Enable—Enables WRR on selected ports.
Not Set—Restores the default queuing algorithm on selected ports.
SP—Assigns a queue to the SP group.
1—Assigns a queue to WRR group 1.
Table 160.
Description
Select the types of interfaces to be configured with rate limit.
486