HP 1920 Series User Manual page 261

3.
Downloaded from www.Manualslib.com
Select Untagged for Select membership type.
c.
d. Enter 100 in the VLAN IDs field.
e. Click Apply.
A configuration process dialog box appears.
f. After the configuration process is complete, click Close.
Figure 223 Adding GigabitEthernet 1/0/1 to VLAN 100
Create VLAN-interface 100:
a. From the navigation tree, select Network > VLAN Interface.
b. Click the Create tab.
c. Enter 100 in the VLAN ID field.
d. Select Configure Primary IPv4 Address.
e. Select Manual.
f. Enter 192.168.1.2 in the IPv4 Address field.
g. Enter 24 or 255.255.255.0 in the Mask Length field.
h. Click Apply.
manuals search engine
248