HP 1920 Series User Manual page 138

3.
4.
Downloaded from www.Manualslib.com
Figure 117 Configuring an SNMP read-only community
Configure a read and write community:
a. Click Add on the Community tab page.
The Add SNMP Community page appears.
Enter private in the Community Name field, and select Read and write from the Access Right
b.
list.
c. Click Apply.
Figure 118 Configuring an SNMP read and write community
Enable SNMP traps:
a. Click the Trap tab.
The Trap tab page appears.
b. Select Enable SNMP Trap.
c. Click Apply.
manuals search engine
125