Creating An Ipv4 Static Route - HP 1920 Series User Manual

Creating an IPv4 static route

1.
2.
3.
4.
Table 91 Configuration items
Downloaded from www.Manualslib.com
Select Network > IPv4 Routing from the navigation tree.
Click the Create tab.
The page for configuring an IPv4 static route appears.
Figure 255 Creating an IPv4 static route
Create an IPv4 static route as described in
Click Apply.
Item Description
Destination IP Address Enter the destination host or network IP address in dotted decimal notation.
Enter the mask of the destination IP address.
Mask
You can enter a mask length or a mask in dotted decimal notation.
Set a preference value for the static route. The smaller the number, the higher the
preference.
Preference
For example, specifying the same preference for multiple static routes to the same
destination enables load sharing on the routes. Specifying different preferences
enables route backup.
Next Hop Enter the next hop IP address in dotted decimal notation.
manuals search engine
Table 91.
280