Configuring The Link Type Of A Port - HP 1920 Series User Manual

Table 40 Configuration items

Configuring the link type of a port

You can also configure the link type of a port on the Setup tab of Device > Port Management. For more
information, see
To configure the link type of a port:
1.
2.
3.
4.
5.
6.
7.
Downloaded from www.Manualslib.com
Figure 134 Creating VLANs
Item Description
VLAN IDs IDs of the VLANs to be created.
•
ID—Select the ID of the VLAN whose description string is to be modified.
Click the ID of the VLAN to be modified in the list in the middle of the page.
Modify the description
of the selected VLAN •
Description—Set the description string of the selected VLAN.
By default, the description string of a VLAN is its VLAN ID, such as VLAN 0001.
"Managing
From the navigation tree, select Network > VLAN.
Click Modify Port.
Select the port that you want to configure on the chassis front panel.
Select the Link Type option.
Set the link type to access, hybrid, or trunk.
Click Apply.
A progress dialog box appears.
Click Close on the progress dialog box when the dialog box prompts that the configuration
succeeds.
manuals search engine
ports."
140