Voice VLAN configuration examples
Configuring voice VLAN on a port in automatic voice VLAN
assignment mode
Network requirements
As shown in
•
•
•
•
Figure 153 Network diagram
Configuring Switch A
1.
Downloaded from
www.Manualslib.com
Figure
153:
Configure VLAN 2 as the voice VLAN allowing only voice traffic to pass through.
The IP phone connected to hybrid port GigabitEthernet 1/0/1 sends untagged voice traffic.
GigabitEthernet 1/0/1 operates in automatic VLAN assignment mode. Set the voice VLAN aging
timer to 30 minutes.
Configure GigabitEthernet 1/0/1 to allow voice packets whose source MAC addresses match the
OUI addresses specified by OUI address 001 1-2200-0000 and mask ffff-ff00-0000. The
description of the OUI address entry is test.
Create VLAN 2:
a.
Select Network > VLAN from the navigation tree.
b.
Click the Create tab.
c.
Enter VLAN ID 2.
d.
Click Create.
manuals search engine
163