HP 1920 Series User Manual page 318

3.
Because the DHCP relay agent and server are on different subnets, you need to configure a static route
or dynamic routing protocol to make them reachable to each other.
Downloaded from www.Manualslib.com
Enable the DHCP relay agent on VLAN-interface 1:
a. In the Interface Config field, click the
following operations, as shown in
b. Select the Enable option next to DHCP Relay.
c. Select 1 for Server Group ID.
d. Click Apply.
Figure 282 Enabling the DHCP relay agent on an interface and correlate it with a server group
manuals search engine
icon of VLAN-interface 1, and then perform the
Figure 282.
305