Configuring Authentication Methods For The Isp Domain - HP 1920 Series User Manual

Configuring authentication methods for the ISP domain

1.
2.
3.
4.
Table 109 Configuration items
Downloaded from www.Manualslib.com
Item Description
Specify whether to use the ISP domain as the default domain. Options include:
•
Enable—Uses the domain as the default domain.
Default Domain •
Disable—Uses the domain as a non-default domain.
There can only be one default domain at a time. If you specify another domain as the
default domain, the original default domain becomes a non-default domain.
Select Authentication > AAA from the navigation tree.
Click the Authentication tab.
Figure 336 Authentication method configuration page
Select the ISP domain and specify authentication methods for the domain, as described in
109.
Click Apply.
Item Description
Select an ISP domain Select the ISP domain for which you want to specify authentication methods.
Configure the default authentication method and secondary authentication method for
all types of users.
Options include:
•
HWTACACS—HWTACACS authentication. You must specify the HWTACACS
Default AuthN
scheme to be used.
Name
•
Local—Local authentication.
Secondary Method
•
None—No authentication. This method trusts all users and is not for general use.
•
RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
•
Not Set—The device uses the default authentication setting, which is local
authentication.
manuals search engine
355
Table