HP 1920 Series User Manual page 164

3.
4.
Table 43 Configuration items
Downloaded from www.Manualslib.com
Figure 146 Creating a VLAN interface
Configure the VLAN interface as described in
Click Apply.
Item Description
Enter the ID of the VLAN interface to be created. Before creating a VLAN interface,
Input a VLAN ID:
make sure the corresponding VLAN exists.
DHCP Configure the way in which the VLAN interface gets an IPv4 address.
Allow the VLAN interface to get an IP address automatically by
BOOTP
selecting the DHCP or BOOTP option. Otherwise, select the Manual
option to manually assign the VLAN interface an IP address.
After a VLAN interface fails to get an IP address through DHCP
Manual
Configure
multiple times, the device stops IP address application and configures
Primary
the default IP address for the interface.
IPv4
Address Configure an IPv4 address for the VLAN interface.
IPv4
Address
This field is available after you select the Manual option.
Set the subnet mask length (or enter a mask in dotted decimal
Mask
notation format).
Length
This field is available after you select the Manual option.
manuals search engine
Table 43.
151
These items
are available
after you
select the
Configure
Primary IPv4
Address box.