Displaying Snmp Packet Statistics - HP 1920 Series User Manual

Displaying SNMP packet statistics

Select Device > SNMP from the navigation tree.
The page for displaying SNMP packet statistics appears.
Figure 114 SNMP packet statistics
Downloaded from www.Manualslib.com
Item Description
Set the security name, which can be an SNMPv1 community name, an
Security Name
SNMPv2c community name, or an SNMPv3 user name.
Set UDP port number.
UDP Port
The default port number is 162, which is the SNMP-specified port used for
receiving traps on the NMS. Generally (such as using IMC or MIB Browser as the
NMS), you can use the default port number. To change this parameter to another
value, you need to make sure the configuration is the same with that on the NMS.
Select the security model, for which you must set the SNMP version. For the
Security Model NMS to receive notifications, make sure the SNMP version is the same with that
on the NMS.
Set the authentication and privacy mode for SNMP traps when the security
model is selected as v3. The available security levels are: no authentication no
privacy, authentication but no privacy, and authentication and privacy.
Security Level
When the security model is selected as v1 or v2c, the security level is no
authentication no privacy, and cannot be modified.
manuals search engine
IMPORTANT:
123