13.1.10 show
mst Config Commands
Displays current system information
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <parameter>
Parameters
Example
RFSwitch(config-mst)#show ?
access-list
aclstats
alarm-log
system
autoinstall
banner
banner
boot
clock
commands
crypto
debugging
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 and RFS4000:
• port-channel
• static-channel-group
?
Displays the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the
autoinstall configuration
Display Message of the Day Login
Display boot configuration.
Display system clock
Show command lists
encryption module
Debugging information outputs
Spanning tree-mst Instance
13-13