Motorola RFS6000 Reference Manual page 826

20-106 Motorola RF Switch CLI Reference Guide
wlan <1-256> radius mac-auth-format [no-delim|pair-colon|
pair-dash|quad-dot|middle-dash]
wlan <1-256> radius mobile-unit timeout <1-10>
retransmit <1-10>
wlan <1-256> radius reauth <30-65535>
wlan <1-256> radius server [primary|secondary|timeout]
wlan <1-256> radius server [primary|secondary] [<IP>
{auth-port <1024-65535>}|radius-key [0 <key>|2 <key>|
<key>]
wlan <1-256> radius server timeout <1-60> retransmit <1-10>
wlan <1-256> secure-beacon
wlan <1-256> set-vlan-user-limit [<1-4094>|<vlan-list>]
<0-8192>
wlan <1-256> smart-scan-channels [<channel-list>|add
<channel-list>|remove <channel-list>]
wlan <1-256> ssid <ssid>
wlan <1-256> storm-control [bcast|mcast|ucast]
rate-limit <1-1000000>
wlan <1-256> syslog accounting server <IP> {port <1-65535>}
wlan <1-256> vlan [<1-4094>|<vlan-list>] {limit <0-8192>}
wlan <1-256> [wep64|wep128] [key|phrase|wep-default-key]
wlan <1-256> [wep64|wep128] key <1-4> [ascii|hex]
[0 <key>|1 <key>|<key>]
wlan <1-256> [wep64|wep128] phrase <pass-phrase>
wlan <1-256> [wep64|wep128] wep-default-key <1-4>
Parameters
<1-256>
<wlan-list>
For each of the options <1-256> and <wlan-list> the following commands are available.
80211-extensions
move-command enable
Defines a single WLAN index
Sets a list (1,3,7) or range (3-7) of WLAN indices
Enables support for 802.11 extensions
• move-command – Enables support for fast roaming
• enable – Enables this extension