21.1.16 switch
RTLS Config Commands
Configures the switch's geographical location parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
switch [coordinates|geo-coordinates]
switch coordinates x <0-65535> y <0-65535> z <0-65535>
switch geo-coordinates longitude <-180.00-80.00>
latitude <-90.00 - 90.00>
Parameters
coordinates x <0-65535>
y <0-65535> z <0-65535>
longitude <-180.00-
80.00> latitude
<-90.00 - 90.00>
Example
RFSwitch(config-rtls)#switch coordinates x 121 y 121 z 135
RFSwitch(config-rtls)#
RFSwitch(config-rtls)#switch geo-coordinates longitude 120
latitude 70
RFSwitch(config-rtls)#
Configures switch coordinates within the site
• x <0-65535> – Configures X coordinate
• y <0-65535> – Configures Y coordinate
• z <0-65535> – Configures Z coordinate
Configures switch geographic coordinates
• longitude <-180.00-180.00> – Configures longitude, in
degrees, for switch
• latitude <-90.00-90.00> – Configures latitude, in
degrees, for switch
RTLS Instance
21-27