Default-Router - Motorola RFS6000 Reference Manual

17-14 Motorola RF Switch CLI Reference Guide

17.1.8 default-router


DHCP Config Commands
Configures the default router or gateway IP address for the network pool. To remove the
default router list, use the
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
default-router <IP>
Parameters
default-router
< IP>
Usage Guidelines
The IP address of the router should be on the same subnet as the client subnet.
Example
RFSwitch(config-dhcp)#default-router 2.2.2.1
RFSwitch(config-dhcp)#
no default-router
Specifies the default router IP address for the
network pool
• < IP> – Sets the router's IP address
command.