Dhcp-Sniff-State - Motorola RFS6000 Reference Manual

20.1.22 dhcp-sniff-state


Wireless Configuration Commands
Records mobile unit DHCP state information
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
dhcp-sniff-state enable
Parameters
enable
Use the
{no} dhcp-sniff-state enable
DHCP state information.
Example
RFSwitch(config-wireless)#dhcp-sniff-state enable
RFSwitch(config-wireless)#
Allows support for recording DHCP state information for
mobile units
command to disable recording mobile unit
Wireless Instance 20-41