Motorola RFS6000 Reference Manual page 872

21-12 Motorola RF Switch CLI Reference Guide
service [filter <1-100>
{length|
memory-bank|offset
}|inventory {<1-
100>|default]
site
zone<1-48>
ap [MAC Address
<coordinates>]
switch [coordinates
|geo-coordinates]
Usage Guidelines
Use command to undo the configurations on the parameters mentioned in the table.
no
Refer to the parameters, within this chapter, for complete syntax.
Example
RFSwitch(config-rtls)#no aeroscout enable
RFSwitch
Negates service configuration for:
• filter <1-100> {length|memory-bank|offset} – Negates
RFID tag filter configuration for the selected index
• length – Length of tag filter
• memory-bank – Tag memory bank
• offset – Offset into the tag memory bank
• inventory [<1-100>|default] – Negates tag inventory for
the selected index or the default index
• filter – Configures tag filter for inventory
• start – Starts tag inventory
• start-trigger – Removes start trigger for tag inventory
• stop-trigger – Removes stop trigger for tag inventory
• zone – Configures logical reader
Negates site configuration
Negates zone configuration
• AA-BB-CC-DD-EE-FF – Disables access port MAC IP
address
• coordinates – Negates AP location configuration
• Negates switch configuration parameters
• coordinates – Negates switch coordinates
configuration within the site
• geo-coordinates – Negates switch geo coordinates
configuration