2-72
Motorola RF Switch CLI Reference Guide
2.2.18 power
Common to all modes
Displays the power configuration and status for the RFS6000 switch
Supported in the following platforms:
• RFS4000
• RFS6000
Syntax
show power [configuration|status]
Parameters
configuration
status
Example
RFSwitch(config)#show power configuration
Power usage trap at 80% of max power (148 of 185 Watts)
port Priority
ge1 high
ge2 high
ge3 high
ge4 high
ge5 high
ge6 high
ge7 high
ge8 high
POE firmware version 01f6 build 4
RFSwitch(config)#
SWITCH NOTE: This command is not supported on:
• RFS7000
Displays configuration of power over ethernet
Displays status of power over ethernet
Power limit Enabled
29.7W
yes
29.7W
yes
29.7W
yes
29.7W
yes
29.7W
yes
29.7W
yes
29.7W
yes
29.7W
yes