Use Case 1: Configuring Remote Vpn - Motorola RFS6000 Reference Manual

5-32 Motorola RF Switch CLI Reference Guide
Example
RFSwitch(config)#crypto pki ?
authenticate
enroll
export
import
trustpoint
RFSwitch(config)#crypto pki trustpoint ?
WORD
RFSwitch(config)#crypto pki trustpoint Test
RFSwitch(config-trustpoint)#?
Trustpoint Config commands:
clrscr
company-name
email
end
exit
fqdn
help
ip-address
no
password
request)
rsakeypair
service
show
subject-name
parameters
RFSwitch(config-trustpoint)#

5.1.8.1 Use Case 1: Configuring Remote VPN

Let us review an example of a mobile unit connected to the switch. Assume it wants
access to the corporate (trusted network) using IPSec VPN functionality.
A Motorola client is associated to a WLAN (say wlan1) attached to vlan2 on the switch.
vlan2 is on subnet 10.1.1.x and is running a DHCP server that assigns IP addresses for this
subnet. The corporate is on vlan3 of the switch, which has 192.168.0.x subnet.
The client being associated to wlan1 has an IP address of 10.1.1101x and wants to access
the 192.168.0.x network securely.
Authenticate and import CA Certificate
Enroll
Export
Import
Define a CA trustpoint
Trustpoint Name
Clears the display screen
Company Name(Applicable only for request)
email
End current mode and change to EXEC mode
End current mode and down to previous mode
Domain Name Configuration
Description of the interactive help system
Internet Protocol (IP)
Negate a command or set its defaults
Challenge Password(Applicable only for
Rsa Keypair to associate with the trustpoint
Service Commands
Show running system information
Subject Name is a collection of required
to configure a trustpoint.