Config-Dhcp-Class - Motorola RFS6000 Reference Manual

3. Create a Pool named
RFSwitch(config)#ip dhcp pool WID
RFSwitch(config-dhcp)#
4. Associate the DHCP class, created in Step 1 with the pool created in Step 3. The switch
supports the association of 8 DHCP classes with a pool.
RFSwitch(config-dhcp)#class RFS7000DHCPclass
RFSwitch(config-dhcp-class)#
5. The switch moves to a new mode (config-dhcp-class). Use this mode to add an address
range used for the DHCP class associated with the pool.
RFSwitch(config-dhcp-class)#address range 11.22.33.44

17.1.3.2 config-dhcp-class

Use
(config-dhcp)# class
instance to set an address range for a DHCP user class within a DHCP server address pool.
Table 17.2
Command
address
clrscr
end
exit
help
no
service
show
, using
WID
to enter the (
summarizes
config-dhcp-class
Table 17.2 DHCP Server Class Command Summary
Sets an address range for a DHCP class in a DHCP server address
pool
Clears the display screen
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Displays the interactive help system in HTML format
Negates a command or sets its defaults
Assists in troubleshooting or debugging issues
Displays running system information
mode.
(config)#
config-dhcp-class) instance
commands.
Description
DHCP Server Instance 17-7
. Use this