Motorola RFS6000 Reference Manual page 790

20-70 Motorola RF Switch CLI Reference Guide
client-bridge
[bb-radio|
bridge-selectmode|
enable|
mesh-timeout <2-200>|
ssid <SSID>]
copy-config-from
[<1-4096>|default-11a|
default-11b|
default-11bg|]
description
<description>
detector
Defines client bridge settings.
• bb-radio <1-16> <MAC>– add the preferred base bridge
details
• <1-16> – Enables the capability
• MAC – MAC address in AA-BB-CC-DD-EE-FF format
• bride-select-mode [auto|manual]– Base bridge selection
mode
• auto – Automatically select base bridge
• manual – Manually select base bridge
• enable – Enables client-bridge functionality on radio
• mesh-timeout [0|1|<2-200>] – Sets the client bridge link
timeout
• 0 – Disable uplink detection
• 1 – Uplink detect - shutdown when all mesh-backhaul
links are down
• <2-200> – Timeout in seconds
• ssid <SSID> – Defines the ESSID of the WLAN
Copies the configuration from a previously configured radio.
• <1-4096> – Defines a single radio index
• default-11a – Uses the default 11a configuration
template
• default-11b – Uses the default 11b configuration
template
• default-11bg – Uses the default 11bg configuration
template
Defines a description for this radio. <description> is a 20
character string.
Dedicates this radio as a detector. No mobile units can
associate to a detector.