Disabling The Command History Feature; Using Output Modifiers To Limit Show Command Output - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide
Note: The arrow keys function is available only on ANSI-compatible
terminals, such as VT100s.

Disabling the Command History Feature

The command history feature is automatically enabled. To disable it during the
current session, use the no history command in User EXEC or Privileged EXEC
mode:
MOT >no history
Using Output Modifiers to Limit Show Command
Output
Filters or "output modifiers" display specific show command information using the
"pipe" character ( | ) and entering the begin, exclude, and include parameters.
For example:
MOT# show ip ospf network [ | {begin | exclude | include} {<WORD>}]
where:
2-16
Press Ctrl-P or the up arrow key - Use this action to recall commands, displaying
the most recent command first. Repeat the key sequence to display successively
older commands.The up arrow key displays the most recent commands on the
current CLI command mode.
Press Ctrl-N or the down arrow key - After recalling commands, use this action to
display more recent commands. Repeat the key sequence to display successively
more recent commands.
show history command - Enter this command in User EXEC or Privileged EXEC
mode to display the last several commands.
| turns on filters
begin indicates to start with the line that matches
exclude excludes lines that match.
include include lines that match
WORD is the text string to match.
MGBI
Release 1.0
526360-001-00 Rev. B