Motorola RFS6000 Reference Manual page 496

12-2 Motorola RF Switch CLI Reference Guide
Command
crypto
description
duplex
end
exit
help
ip
mac
management
no
port-channel
power
service
show
shutdown
spanning-tree
Table 12.1 Interface Config Command Summary (Continued)
Defines the encryption module
Creates an interface specific description
Sets the duplex mode used by the interface
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Displays the interactive help system
Sets the IP address for the assigned ethernet, VLAN or
tunnel
Applies a MAC access list to a gigabit ethernet
interface
Sets the selected interface as the management
interface
Negates a command or sets its defaults
Configures the load-balancing criteria of an aggregated
port
PoE (Power Over Ethernet) commands used to configure
PoE power limit and priority for a port
Invokes service commands to troubleshoot or debug
the
(config-if)
Displays running system information
Shuts down a selected interface
Disables the selected interface. The interface is
administratively enabled unless explicitly disabled
using this command
Description
instance configurations
Ref.
page 12-5
page 12-6
page 12-7
page 12-8
page 12-9
page 12-10
page 12-11
page 12-14
page 12-15
page 12-16
page 12-17
page 12-21
page 12-23
page 12-25
page 12-28
page 12-29