Vitosol 100-F, Type Sv1 And Sh1; Product Description; Benefits; Delivered Condition - Viessmann VITOSOL 100-F SV Technical Manual

Vitosol 100-F, type SV1 and SH1

2.1 Product description

The selectively coated absorber of the Vitosol 100-F, type SV1A/SH1A
ensures a high level of absorption of the available insolation. The cop-
per pipe shaped like a meander ensures an even heat transfer at the
absorber.
The collector casing features heat-resistant thermal insulation and a
cover made from low ferrous solar glass.
Flexible connection pipes sealed with O-rings provide a secure parallel
connection of up to 12 collectors.
2
A Solar glass cover, 3.2 mm
B Cover bracket made from aluminium
C Pane seal
D Absorber

Benefits

■ Powerful, attractively priced flat-plate collector.
■ Absorber designed as meander layout with integral headers. Up to
12 collectors can be linked in parallel.
■ Universal application for above roof and freestanding installation
— either in vertical (type SV) or horizontal (type SH) orientation.
Type SH is suitable for installation on walls.
■ High efficiency through selectively coated absorber and cover made
from low ferrous solar glass.
■ Permanently sealed and highly stable through all-round folded alu-
minium frame and seamless pane seal.

Delivered condition

The Vitosol 100-F is delivered fully assembled ready to connect.

2.2 Specification

Vitosol 100-F is available with 2 different absorber coatings. Type
SV1B/SH1B has a special absorber coating that allows these collec-
tors to be used in coastal regions.
VIESMANN
12
A connection set with locking ring fittings enables the collector array
to be readily connected to the solar circuit pipework. The collector
temperature sensor is mounted in a sensor well set in the solar circuit
flow.
The Vitosol 100-F, type SV1B/SH1B with a special absorber coating
is designed for coastal regions (see chapter "Specification").
E Meander-shaped copper pipe
F Thermal insulation made from mineral fibre
G Aluminium frame
H Steel bottom plate with an aluminium-zinc coating
■ Puncture-proof and corrosion-resistant back panel made from zinc-
plated sheet steel.
■ Easy to assemble Viessmann fixing system with statically-tested and
corrosion-resistant components made from stainless steel and alu-
minium – standard for all Viessmann collectors.
■ Quick and reliable collector connection through flexible corrugated
stainless steel pipe push-fit connectors.
Distance to the coast:
■ up to 100 m:
VITOSOL