Vitosol 200-F, Type Sv2 And Sh2; Product Description; Benefits - Viessmann VITOSOL 100-F SV Technical Manual

Vitosol 200-F, type SV2 and SH2

4.1 Product description

The main component of the Vitosol 200-F, type SV2C/SH2C is the
highly selectively coated absorber. It ensures a high absorption of
insolation and low emission of thermal radiation. A meander-shaped
copper pipe through which the heat transfer medium flows is part of
the absorber.
The heat transfer medium absorbs the absorber heat through the cop-
per pipe. The absorber is encased in a highly insulated collector hous-
ing that minimises the heat losses of the collector.
The high-grade thermal insulation provides temperature stability and
is non-outgassing. The collector is covered with a solar glass panel.
The glass has a very low iron content, thereby reducing reflection los-
ses.
4
A Solar glass cover, 3.2 mm
B Aluminium cover strip in dark blue
C Pane seal
D Absorber
E Meander-shaped copper pipe

Benefits

■ Powerful flat-plate collector with a highly selectively coated
absorber.
■ Absorber designed as meander layout with integral headers. Up to
12 collectors can be linked in parallel.
■ Universal application for above roof and freestanding installation
— either in vertical (type SV) or horizontal (type SH) orientation.
Type SH is suitable for installation on walls.
■ Attractive collector design; frame in dark blue. Upon request, the
frame is also available in any RAL colour.
■ The selectively coated absorber, the highly effective thermal insula-
tion and the cover made from low ferrous solar glass ensure a high
solar yield.
VIESMANN
18
Up to 12 collectors can be combined together to create a single col-
lector array. For this purpose, the standard delivery includes flexible
connection pipes with O-rings.
A connection set with locking ring fittings enables the collector array
to be readily connected to the solar circuit pipework. The collector
temperature sensor is mounted in a sensor well set in the solar circuit
flow.
The Vitosol 200-F, type SV2D with a special absorber coating is
designed for coastal regions (see chapter "Specification").
A
B
C
D
E
F
G
H
K
F Melamine epoxy foam insulation
G Melamine epoxy foam insulation
H Aluminium frame in dark blue
K Steel bottom plate with an aluminium-zinc coating
■ Long-lasting impermeability and high stability thanks to all-round fol-
ded aluminium frame and seamless pane seal.
■ Puncture-proof and corrosion-resistant back panel.
■ Easy to assemble Viessmann fixing system with statically-tested and
corrosion-resistant components made from stainless steel and alu-
minium – standard for all Viessmann collectors.
■ Quick and reliable collector connection through flexible corrugated
stainless steel pipe push-fit connectors.
VITOSOL