Table of Contents
Advertisement
4. Descriptions of various test commands
Main
Sub
Contents
code
code
22
11
FAX-related counter display
24
10
FAX counter clear (FAX
CLR.)
46
12
Density adjustment in the
FAX mode (Collective
adjustment)
[Function]
The FAX-related counter is displayed.
[Operation]
1) Initial display
SELECT COUNTER
1:PAGE
2:TIME
∗
[CLEAR] key: Returns to the main-sub code
input display.
2) Select 1
SEND PAGE:xxx,xxx
RECV PAGE:xxx,xxx
("xxx,xxx" is the current value.)
∗
[CLEAR] key: Returns to "1) Initial display".
[Function]
When PRINT switch is pressed, the FAX count value is set to 0 and "000,000" is displayed on the
LCD.
[Operation]
1) Initial display
24-10 FAX CLR.
CLEARED
000,000
[Function]
When [START] key is pressed, scan is executed with the entered exposure adjustment value and the
data stored on the FAX side is rewritten into the entered value.
All data of the exposure adjustment values are rewritten into the same value.
For the density adjustment table data, refer to TC46-13 (density adjustment (normal text) in the FAX
mode).
[Operation]
1) Initial display
ADJUST
EXP.
AUTO
XX
("XX" is the exposure adjustment value of nor-
mal text stored on the FAX side.)
2) Enter a 2-digit value as the exposure adjust-
ment value.
ADJUST
EXP.
AUTO
YY
("YY" is the entered exposure adjustment
value.)
GD-1190 TEST COMMAND 3 - 2
Details of function/operation
2) Select 2
TX TIME:xxxx:xx.xx
RX TIME:xxxx:xx.xx
("xxxx: xxx. xx" is the current value.)
∗
[CLEAR] key: Returns to "1) Initial display".
3) Scan is started (self print), and the LED of
[START] key is turned off.
ADJUST
EXP.
SCAN
4) Print is started (self print).
ADJUST
EXP.
PRINT
After completion of printing, returns to "2)" dis-
play.
AUTO
YY
AUTO
YY
Advertisement
Table of Contents
