Toshiba GD-1190 Service Manual page 13

(10) Attach the FAX keyboard.
1) Connect the copier flat cable to the FAX keyboard. Note that the
cable should be folded as shown below and placed under the key-
board.
2) Place the FAX keyboard and secure it using the screw removed
earlier.
3) Affix the key sheet to the FAX keyboard.
(11) Paste the label on the rear cabinet of the copier.
Paste the FCC label on the position shown in the illustration.
In order to manifest the compliance with FCC Part 68 and IC CS-03,
it is required to provide the machine with the FCC Registration Num-
ber (USA), Ringer Equivalence (USA) and Ringer Equivalence (Can-
ada).
After installing the FAX expansion kit in the machine, please put the
registration label, packed with the kit, on the prescribed location.
Insert the power plug of the copier to the outlet and turn on the
main switch of the copier. Then, carry out the following
procedure.
(12) Connect the FAX modem PWB line cable.
Connect the line cable to the FAX modem PWB.
To set up a telephone, wrap the line cable twice around the core, and
connect it to the FAX modem PWB as shown.
GD-1190 INSTALLATION PROCEDURE 2 - 3