Table of Contents
Advertisement
3.
Main Service Parts for Safety
• The breaker, door switch, fuse, thermostat, thermofuse, thermistor, etc. are particularly important for
safety. Be sure to handle/install them properly. If these parts are shorted circuit and/or made their
functions out, they may burn down, for instance, and may result in fatal accidents. Do not allow a
short circuit to occur. Do not use the parts not recommended by Toshiba TEC Corporation.
4.
Cautionary Labels
• During servicing, be sure to check the rating plate and the cautionary labels such as "Unplug the
power cord during service", "Hot area", "Laser warning label" etc. to see if there is any dirt on their
surface and whether they are properly stuck to the machine.
5.
Disposition of Consumable Parts, Packing Materials
• Regarding the recovery and disposal of the machine, supplies, consumable parts, packing materials,
follow the relevant local regulations or rules.
6.
When parts are disassembled, reassembly is basically the reverse of disassembly unless
otherwise noted in this manual or other related documents. Be careful not to reassemble small
parts such as screws, washers, pins, E-rings, star washers in the wrong places.
7.
Basically, the machine should not be operated with any parts removed or disassembled.
8.
Precautions Against Static Electricity
• The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband,
because the ICs on it may become damaged due to static electricity.
Caution: Before using the wristband, pull out the power cord plug of the machine and make
sure that there are no uninsulated charged objects in the vicinity.
Advertisement
Table of Contents
