User Test Mode; Automatic Test Mode; Auto Test - Toshiba DP125F Operator's Manual

USER TEST MODE - AUTOMATIC TEST MODE

AUTO TEST

AUTO TEST mode, permits you to automatically perform a series
of machine tests in one operation.
The test items performed by the AUTO TEST are:
• FLASH ROM TEST
Checks the program data, function data, and language data.
• SRAM TEST
Checks the SRAM Memory.
• DRAM TEST
Checks the DRAM Memory.
• MODEM TEST (Line 1, Line 2: Only when installed)
Checks the modem and detects a line current.
• SCANNER TEST
Checks the image scanner.
• CODEC TEST
Checks the CODEC IC.
• PRINTER TEST
Checks the printer components for proper operation and prints
one test page.
• PHONE BOOK DATA TEST
Checks the phone book data.
NOTE:
AUTO TEST cannot be performed if the data, such as re-
ceived data, delayed transmission, or polling data, is stored in
the memory.
240
1 2
Display the TEST
MODE Menu
Press:
Press:
+
The auto test starts,
on the screen indicating that
the test is under way.
1.AUTO TEST
2.INDIVIDUAL TEST
3.TEST RESULT LIST
To
press
3
Select the AUTO Completed the
TEST Menu AUTO TEST
When all the tests end, the
word
PLETED" is displayed on the
screen and the display returns
to showing the standby mode
appears
screen.
The results of the auto test can
be confirmed with the self test
report. To print the self test re-
AUTO TEST
port, refer to "PRINTING A
TEST RESULT" on page 252.
--------------------
If the result of the auto test is
judged to be NG, call your ser-
vice representative.
AUTO TEST
---------------
suspend the auto test,
.
"OPERATION COM-