Konica Minolta bizhub C250 User Manual page 602

Utility
5
Touch [4 Punch Resist Loop Size].
The Punch Resist Loop Size screen appears.
6
Check the angle of the punched holes.
– If the punched holes are angled, touch [+] to change the adjust-
ment. If the angle cannot be adjusted by touching [+] or if the paper
is wrinkled, touch [–] to change the adjustment.
– To scroll through the values quickly, touch [+] or [–] continuously.
7
Touch [OK].
– To cancel changes to the settings, touch [Cancel].
The angle of the punched holes is adjusted.
If no adjustment of the angle of the punched holes was necessary in
step 6, this completes the procedure.
8
Use the "Punch" function to print a another sample copy.
9
Check the print result.
– Check that the angle of the punched holes was adjusted.
– If more adjustment is necessary, repeat steps 1 and 8.
C250
12
12-71