Descriptions And Symbols For Documents And Paper; Width" And "Length; Paper Orientation - Konica Minolta bizhub C250 User Manual

Introduction

Descriptions and symbols for documents and paper

The use of words and symbols in this manual are explained below.

"Width" and "Length"

Whenever paper dimensions
are mentioned in this manual,
the first value always refers to
the width of the paper (shown
as "Y" in the illustration) and
the second to the length
(shown as "X").

Paper Orientation

Lengthwise (w)
If the width (Y) of the paper is
shorter than the length (X), the
paper has a vertical or portrait
orientation, indicated by w.
C250 x-49