Konica Minolta bizhub C250 User Manual page 577

12
Parameter
Overwrite All Data
HDD Lock Password
HDD Formatting
HDD Encryption Setting
Management Function Setting
Parameter
Network Function Set-
ting
Note
For details on displaying [Function Setting], [Max. No. of Sets to Copy
Setting] and [Authentication Time Setting], contact your technical repre-
sentative.
!
Detail
When "Network Function Setting" is set to "Disable", the following oper-
ations cannot be performed.
· PC-FAX transmission
· Using the HDD TWAIN driver to view and retrieve documents in boxes
· Using the PageScope Box Operator to view and retrieve documents in
boxes
· Using the PageScope Scan Direct to retrieve documents in boxes
· Using the PageScope Job Spooler to view and retrieve documents in
boxes
· Box operations using the PageScope Web Connection (The Box tab
does not appear.)
12-46
Description
Select this parameter to overwrite all data on
the entire hard disk when returning or dispos-
ing of this machine in order to prevent disclo-
sure of the data. For details on the settings,
refer to the User's Guide [Box Operations].
Before performing this operation, contact your
technical representative.
Specify the password for protecting the data on the hard disk. For
details, refer to the Box Operations of the User's Guide.
Select this parameter to format the hard disk. For details, refer to the
Box Operations of the User's Guide.
Appears when optional security kit is installed. Specify the settings
for encrypting the hard disk. When a setting is specified, all data writ-
ten to the hard disk is encrypted to protect it. If the encryption key is
changed, the hard disk will be reformatted. For details, refer to the
Box Operations of the User's Guide.
Description
Specify settings for network functions that are
difficult to count when managing operations.
Utility
Default Setting
Mode 1
Default Setting
Allow
C250