Basic copy operations
To select single-sided copies
0 The default setting is "1→1".
0 For details on using the original glass to scan multiple document pages,
refer to "Scanning a multi-page document from the original glass" on
page 3-15.
1
In the Basic screen, touch [Simplex/Duplex].
The Simplex/Duplex screen appears.
2
Touch [1→1] or [2→1].
–
If "2→1" is selected, specify the binding direction and the original
direction, otherwise the copies will not be printed as desired.
–
If the binding position for the document is set to "Auto", the position
of the binding margin is automatically selected. A binding margin
along the long side of the paper is selected if the document length
is 11-3/4 inch or less. If the document length is more than 11-3/4
inch, a binding margin along the short side of the paper is selected.
–
If the binding position for the document is set to "Auto", the binding
margin is set at the top or at the left.
–
The screens that appear differ depending on the options that are in-
stalled.
C250
3
3-51