Konica Minolta bizhub C250 User Manual page 563

12
Parameter
Density
Adjust-
ment
Image Stabilization
Color Reg-
istration
Adjust
Gradation
Adjust-
ment
12-32
Description
Thick Pa- Adjust the image density for printing on
per Image thick paper, overhead projector trans-
Density– parencies, or envelopes. The density can
Yellow be adjusted separately for each color
(yellow, magenta, cyan and black for a
Thick Pa-
color image and the black image densi-
per Image
ty). The higher the setting, the darker the
Density–
density.
Magenta
Adjust the setting for yellow, magenta,
cyan and black between –5 and +5.
Thick Pa-
Adjust the setting for "Black Image Den-
per Image
sity" between –2 and +2.
Density–
Cyan
Thick Pa-
per Image
Density–
Black
Black Im-
age Densi-
ty
Perform an image stabilization if the im-
age is incorrect, even after the gradation
levels have been adjusted.
• Image Stabilization Only:
Perform normal image stabilization.
• Initialize + Image Stabilization:
Select when a good result was not
achieved after "Image Stabilization
Only" was selected.
Color Reg- Adjust the color registration if color shifts
istration can be seen in the print result.
Adjust
(Yellow)
Color Reg-
istration
Adjust
(Magenta)
Color Reg-
istration
Adjust (Cy-
an)
Copy Adjust the gradation if there are changes
in the color gradations of the print image.
The adjustment is made with stress on
increasing the number of images stored
in the memory.
Printer Adjust the gradation if there are changes
(Gradation) in the color gradations of the print image.
The adjustment is made with stress on
the gradations in images.
Printer Adjust the gradation if there are changes
(Resolu- in the color gradations of the print image.
tion) The adjustment is made with stress on
the reproducibility of text and lines.
Utility
Default Setting
0
0
0
0
0
–
–
–
–
–
–
–
C250