Konica Minolta bizhub C250 User Manual page 9

Finisher FS-514/output tray OT-601/punch kit PK-510 ................2-18
Control panel ................................................................................2-21
Basic settings screen (Basic screen) ............................................2-24
Icons that appear in the screen ....................................................2-26
2.2 Adjusting the angle of the control panel .......................................2-27
To adjust the angle of the control panel .......................................2-27
2.3 Turning on the Main Power and the Auxiliary Power ...................2-29
To turn on the machine .................................................................2-29
To scan during warm-up ...............................................................2-31
To turn off the machine .................................................................2-33
Automatically canceling the settings (automatic panel reset) .......2-34
Automatically canceling the mode screen
(automatic system reset) ...............................................................2-34
Automatically conserving energy (Low Power mode) ...................2-35
Automatically conserving energy (Sleep mode) ............................2-36
Manually conserving energy .........................................................2-37
Automatically turning the machine on/off (weekly timer) ..............2-38
Controlling each user's use of this machine
(user authentication) .....................................................................2-40
Controlling each account's use of this machine
(account track) ..............................................................................2-43
2.4 Loading paper into the 1st tray ......................................................2-47
To load paper (1st tray) .................................................................2-47
2.5 Loading paper into the 2nd, 3rd or 4th tray ..................................2-53
To load paper (2nd, 3rd or 4th tray) ..............................................2-53
2.6 Loading paper into the LCT ............................................................2-55
To load paper (LCT) ......................................................................2-55
2.7 Loading paper into the bypass tray ...............................................2-58
To load paper (bypass tray) ..........................................................2-58
3 Basic copy operations
3.1 General copy operation ....................................................................3-2
To make a copy ..............................................................................3-2
3.2 Operations that cannot be combined ..............................................3-5
Operations where the setting specified last is given priority ..........3-5
Operations where the setting specified first is given priority ..........3-6
3.3 Feeding the document ......................................................................3-7
To load the document into the ADF ................................................3-7
To place the document on the original glass ..................................3-9
Scanning the document in separate batches
("Separate Scan" setting) ..............................................................3-11
x-8
Introduction
C250