Konica Minolta bizhub C250 User Manual page 590

Utility
6
Compare the width of
the left pages of the
copy sample with the
width of the right pages
to check for the center of
the paper.
– If the staple position
is too far to the left of
the center of the pa-
per, touch [+] to in-
crease the
adjustment (between
1 mm and 7 mm).
– If the staple position
is too far to the right
of the center of the
paper, touch [–] to re-
duce the adjustment
(between –1 mm and
–7 mm).
– To scroll through the
values quickly, touch
[+] or [–] continuous-
ly.
7
Touch [OK].
– To cancel changes to the settings, touch [Cancel].
The center stapling position is adjusted.
If the stapling position was at the center of the paper in step 6, this
completes the procedure.
8
Use the "Fold & Staple" function to print a another sample copy.
9
Check the print result.
– Check that the stapling position is adjusted to the center of the pa-
per.
– If more adjustment is necessary, repeat steps 6 and 8.
C250
12
12-59