Konica Minolta bizhub C250 User Manual page 149

3
3
Press the [Start] key.
Scanning begins.
– If the "Print Setting for Separate Scan" parameter is set to "Batch
Print", touch [Finish] in the following screen, which appears while
the document is scanned with the ADF, to continue to step 5.
4
Load the next batch of the document, and then press the [Start] key.
– Repeat this step until all pages of the document have been
scanned.
– If the document cannot be loaded into the ADF, place it on the orig-
inal glass. For details on the types of documents that can be loaded
into the ADF, refer to "Original documents" on page 7-25.
– The amount of memory available can be checked beside "Memory"
in the upper-right corner of the Basic screen.
– To delete the image data, press the [Stop] key, and then delete the
job. For details, refer to "Stopping scanning/printing" on page 3-86.
– To change the scanning settings, touch [Change Setting]. For de-
tails on changing the scanning settings, refer to "To change scan
settings for each document" on page 3-29.
3-12
Basic copy operations
C250