Konica Minolta bizhub C250 User Manual page 427

8
4
Touch [–] or [+] to specify the margin width.
– If "None" is selected, the margin width is set to 0 in.. When making
double-sided copies, the image orientation can adjusted without
creating a filing margin.
– If a decimal value is displayed in the screen, press the [C] (clear)
key, and then use the keypad to type in the setting. For details on
switching between decimal and fraction values, refer to "System
setting" on page 12-17.
– If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
? How can the entered margin position be corrected?
% Without changing the margin width, change the margin position.
5
Touch [OK].
6
If necessary, specify any other copy settings.
7
Using the keypad, type in the desired number of copies.
8
Press the [Start] key.
8-60
Application functions
C250