Mantel And Wall Projections - Heat & Glo Everest Owner's Manual

D. Mantel and Wall Projections
WARNING! Risk of Fire! Comply with all minimum clear-
ances as specifi ed. Framing or fi nishing material closer than
the minimums listed must be constructed entirely of noncom-
bustible materials (i.e., steel studs, concrete board, etc).
The following diagram shows the minimum vertical and
corresponding maximum horizontal dimensions of fi replace
mantels or other combustible projections above the top
front edge of the fi replace. See Section 6 of this manual
for other fi replace clearances.
Only non-combustible materials may be used to cover the
black fi replace front.
Combustible Mantels
7
6
5
4
3
2
3
2
TOP FRONT EDGE
OF FIREPLACE
Figure 5.3. Minimum Vertical and Maximum Horizontal
Dimensions of Combustibles above Fireplace
CEILING
12
11
10
9
8
11
10
9
8
7
6
5
4
Heat & Glo • Everest • 750-900 Rev. W • 10/14
31
12
Figure 5.4 Non-Combustible Zone
= 4-1/2 INCHES AIR SPACE
19