Heat & Glo Everest Owner's Manual page 46

Hide thumbs Also See for Everest:
Table of Contents

Advertisement

LOG NUMBER 5 (SRV750-706):
The top of the log is to be placed as to not cover any ports on the burner.
LOG NUMBER 6 (SRV750-704):
on the right inner log #4. Fit the bottom of the log between the two tines on the left side of the grate with the
groove in the log on the outer tine.
Rock Placement Instructions
The black rock, included in the log package, can
be placed below the grate on the base refractory
(see Figure 2). The rock is decorative and is not
required.
46
Place the small log #5 with the base on the inner right grate tine.
Place the left inside log #6 with the top fi tting into the fl at spot
Figure 2
Heat & Glo • Everest • 750-900 Rev. W • 10/14
GRATE
ROCK

Advertisement

Table of Contents
loading

Table of Contents