Denon DVD-3910 Operating Instructions Manual page 20

ENGLISH
e When "DENON LINK" is selected:
OFF (Factory default)
Digital audio signals are not output from the DENON LINK
terminal.
2nd
Set this when the amplifier to be connected by DENON
LINK 2nd.
If you connect the DENON LINK, set to 2nd.
When the DENON LINK 2nd connection, Super audio
CD's signals are not output from the DENON LINK
connector. Please use the analog output terminals or the
IEEE1394 connection.
When the DENON LINK connection, could be output
192-176kHz/24bit 2ch sources or 96kHz/24bit 6ch
sources.
When the DENON LINK is set, the down mixed audio
signals are output only from the Left and Right and Front
Left and Front Right terminals.
r When "IEEE1394" is selected:
OFF (Factory default)
Digital audio signals are not output from the IEEE1394
terminal.
ON
B When "ON" is selected:
This will lead to the "AUTO PLAY", and "AUDIO
FORMAT" setting screens. Select the item to be set
using the (•, ª) cursor buttons and press the ENTER
button.
No audio signals are output from the analog connectors
when IEEE1394 is set.
3
B Auto Play
Set this when automatically playing this unit from
another device, under circumstances in which this unit
is used in conjunction with a DENON device that
supports IEEE1394.
B Audio Format
Set this format of audio signals from IEEE1394
connector.
B Auto Play Setting Method
OFF (Factory default)
Set this when you do not wish to control the operation
of this unit from another device.
ON
Set this when you wish to control the operation of this
unit from another device.
B Audio Format Setting Method
FORMAT 1 (Factory default)
Set this when you conjunction with a DENON device.
FORMAT 2
This is a mode for future system expansion.
IEEE1394 indicator in the display
When "IEEE1394" set to "ON", this indicator lights as
bellow.
flashing ................self check of IEEE1394
connections.
light......................IEEE1394 connection is OK.
slow flashing........IEEE1394 connection is NG.
(Loop connection) confirm the
connection.
fast flashing .........IEEE1394 connection is NG.
confirm the connection.
20
When "VIDEO SETUP" is selected
D I G I T A L I NTERF ACE S ET UP
HDM I/ DV I BLACK L EVEL
HDM I AUDIO S ETUP
DENON LINK OFF
2nd
IE E E1394
E X I T SE TUP
SE L ECT : DE C I S I ON : ENTER BUT TON
D I G I T A L I NTERF ACE S ET UP
HDM I/ DV I BLACK L EVEL 1
HDM I AUDIO S ETUP
DENON LINK
IE E E1394 OFF
ON
E X I T SE TUP
SE L ECT : DE C I S I ON : ENTER BUT TON
I EE E 1 3 9 4 SE TUP
2
I E EE 1 3 9 4 SE TUP
AUTO PL AY OFF
F ORMAT 1
AUD I O F ORMAT
SE L ECT : DEC I S I ON : ENTER BUT TON
I E EE 1 3 9 4 SET UP
I EE E 1 3 9 4 S ETUP
AUTO PL AY OFF
AUD I O F ORMAT ON
SE L ECT : DEC I S I ON : ENTER BUT TON
I E EE 1 3 9 4 SET UP
I EE E 1 3 9 4 S ETUP
AUTO PL AY 3
AUD I O F ORMAT FORMAT1
FORMAT2
SE L ECT : DE C I S I ON : ENTER BUT TON
To exit the setup mode
Use the ª cursor button to select
"EXIT SETUP", then press the
ENTER button. It is also possible to
quit by pressing the SETUP button
on the remote control unit.
1
See page 15.
Use the • and ª cursor buttons to select the desired setting,
then press the ENTER button.
TV ASPECT
Use this to set the shape of your TV's screen.
TV TYPE
Use this to set your TV's video format (NTSC, PAL or MULTI).
VIDEO OUT
Use this to select either the progressive image output or
interlace image output.
PROGRESSIVE MODE
A method of progressive conversion can be set depending
on the image recorded to the DVD.
SQUEEZE MODE
The size of the screen to be output can be switched.
AV1 VIDEO OUT (For only European model)
To select whether composite video signals or S video signals
or RGB signals will be output from the AV1 SCART terminals.
Use the • and ª cursor buttons to select the desired setting,
then press the ENTER button.
q When "TV ASPECT" is selected:
4:3 PS
Select this to play wide DVDs in the pan & scan mode
(with the sides of the picture cut off). Discs for which pan
& scan is not specified are played in the letter box mode.
4:3 LB
Select this to play wide DVDs in the letter box mode (with
black strips at the top and bottom).
WIDE (16:9) (Factory default)
Select this to play wide DVDs in the full-screen mode.
w When "TV TYPE" is selected:
NTSC
Select this when your TV's video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
PAL
Select this when your TV's video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI (Factory default)
Select this when your TV is compatible with both the NTSC
and PAL formats.
If you play the disc recorded NTSC format, signal from
video output terminal will be switched to NTSC is selected,
output format is fixed to NTSC.
1
1, 2, 3
Remote control unit Remote control unit
V I DEO SE TUP
TV ASPECT W I DE ( 1 6 : 9 )
TV TYPE MUL T I
V I DEO OUT PROGRESS I VE
AUTO1
PROGRE SS I VE MODE
SQUEE Z E MODE OF F
VIDEO
AV1 V I DEO OUT
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
V I DEO SE TUP
TV ASPECT 4 : 3 PS
TV TYPE 4 : 3 L B
V I DEO OUT W I DE ( 1 6 : 9 )
PROGRE SS I VE MODE
SQUEE Z E MODE
AV1 V I DEO OUT
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
V I DEO SE TUP
TV ASPECT
TV TYPE NTSC
V I DEO OUT PAL
MUL T I
PROGRE SS I VE MODE
SQUEE Z E MODE
AV1 V I DEO OUT
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON