Authentication; Login Type - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

Set the passcode after setting the system administrator's user ID. You can set the passcode
from 4 to 12 characters.
For more information about [Passcode Entry for Control Panel Login], refer to "Passcode Policy" (P.272).
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
3
Enter a new passcode (4 to 12 digits) using the
keyboard displayed, and then select [Save].
Note • If no passcode is set, leave the text boxes
4
Select [Retype Passcode], enter the same
passcode, and then select [Save].
5
Select [Save].
6
A confirmation window appears. Select [Yes] to confirm your entry.

Authentication

In [Authentication], you can set the following items.
The following shows the reference section for each setting.
Login Type......................................................................................................................................................................................267
Access Control...............................................................................................................................................................................268
Create/View User Accounts .......................................................................................................................................................269
Reset User Accounts ....................................................................................................................................................................269
Create Authorization Groups.....................................................................................................................................................269
User Details Setup........................................................................................................................................................................270
Maximum Login Attempts by System Administrator ..........................................................................................................272
Passcode Policy .............................................................................................................................................................................272
Charge/Private Print Settings....................................................................................................................................................273
Receive Control .............................................................................................................................................................................273

Login Type

Allows you to select a type of authentication.
No Login Required
Does not use the Authentication feature.
Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note • When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login] is
Login to Remote Accounts
Authenticates users based on the user information registered on a remote authentication
server.
Note • When [Login to Remote Accounts] is selected, the machine enters the Login mode and [Login] is
blank and select [Save].
displayed at the lower left of the Services Home screen.
displayed at the lower left of the Services Home screen.
Authentication/Security Settings
267
5