Maintenance - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

5 Tools
Off
Does not print a report regardless of the completion of the data transmission.
On
Automatically prints a Transmission Report for a successful transmission and a Transmission
Report (undelivered) for a transmission failure.
Print when delivery fails
Prints a Transmission Report (undelivered) for a transmission failure.
2 Sided Report
Select whether or not to print a report on one side of the paper or both sides when printing
a report/list.
Activity Report - Recipient
Select how the information on recipients is shown when printing an Activity Report: the first
40 characters or the last 40 characters.
Job Flow Error Report (ApeosPort Series Models Only)
Select whether or not to automatically print a Job Flow Error Report.
5

Maintenance

You can initialize or delete data from the hard disk of the machine.
EP Diagnostic Request/Repair Request
When the EP system via the Internet is used, the machine contacts our Customer Support
Center if a check or maintenance is required. Our service representative visits your place as
required.
Note
For more information on the EP system, refer to "EP System" (P.620).
Check EP Connection
This feature is used to check whether or not the communications between the machine and
our Customer Support Center function normally when the EP system via the Internet is used.
Note
For more information on the EP system, refer to "EP System" (P.620).
EP Registration
BB Registration
Select [BB Registration] and then select [Start] to register the machine in EP system.
EPA Server Registration
After the BB registration, [EPA Server Registration] is automatically selected in accordance
with your environment. When this feature is selected, enter the destination server IP of your
EPA server and then select [Start] to register the machine in the EPA server.
142
• The EP system is not available in some region. For more information, contact our Customer Support
Center.
• The EP system is not available in some region. For more information, contact our Customer Support
Center.