Other Errors - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

Error Code
133-210 [Cause]
133-211
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
133-226 [Cause]
[Remedy] Contact our Customer Support Center.
133-280 [Cause]
133-281
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
133-282
133-283
133-701 [Cause]
[Remedy] Enter available characters to Name, Company Logo, Fax Comment, or Local Name.
133-710 [Cause]
[Remedy] Take one of the following measures:
Note • If you cannot resolve an error despite following the instructions described in the table, contact our

Other Errors

This section describes the remedies when the following messages are displayed.
Cause and Remedy
An error occurred during fax transmission.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
A country code not supported by the machine was specified.
An error occurred during fax transmission.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Unavailable characters are included in Name, Company Logo, Fax Comment, or Local
Name and the characters are converted.
When the available characters are not clear, enter alphanumeric characters only.
When printing the received fax document, the paper loaded on the bypass tray was
used for printing because the specified tray could not be used.
Load paper available for printing the received fax document.
Use a paper type available for printing the received fax document:
plain paper, bond paper, recycled paper, side 2 paper, user-defined custom paper.
Confirm the settings by selecting [Tools] > [Fax Service Settings] > [Fax Control] >
[Receiving Paper Size].
1)Select [Receiving Paper Size] > [Tray Mode] to add a tray to be used for printing the
received fax documents.
2)Set up paper so that the tray specified for [Tray Mode] can be used for printing the
received fax documents.
If the error still is not resolved, contact our Customer Support Center.
Customer Support Center. The contact number is printed on the label or card attached on the
machine.
Error Code
14
509