Postscript Font Absence; Postscript Font Substitution - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

5 Tools
When PostScript data generated by other than the print driver is printed, the tray is not
selected as intended depending on the description method of the PostScript data. In this
case, select [Select Paper Tray].
Note

PostScript Font Absence

Set an action to take when a PostScript font specified in a job is not present.
Note
Cancel Printing
Cancels printing.
Substitute Font and Print
Prints using a substitute font. Courier is used as the substitute font.

PostScript Font Substitution

Set whether or not to use ATCx as a substitute if a PostScript font specified in a job is not
present.
5
Note
XPS Print Ticket Processing
Set how the machine processes the print tickets written in XPS documents.
Note
Off
Does not process print tickets.
Standard Mode
Uses the standard mode to process print tickets.
Compatible Mode
Uses the Microsoft
LPD Print Queue
Set the LPD print sequence.
Note
Data Processing Order
Prints jobs in the order of becoming print-ready status after receiving the jobs.
If you instruct the machine to print jobs of multiple documents continuously, the machine
may preferentially print a job which was sent later depending on the time for data
processing.
Job Submission Order
Prints jobs in the order of lpr print submission.
196
• Even when you select [Auto Select], the setting is automatically changed to [Select Paper Tray] when
[Use Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print PostScript data.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• XPS stands for XML Paper Specification.
®
-compliant mode to process print tickets.
• If you change the [LPD Print Queue] setting, the [Receiving Buffer - LPD] setting may automatically
be changed. For more information on Receiving Buffer - LPD Spool, refer to "Receiving Buffer - LPD"
(P.192).